logo

Подробная информация о продукции

Created with Pixso. Дом Created with Pixso. Продукты Created with Pixso.
заусенец карбида вольфрама
Created with Pixso.

SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs

SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs

Наименование марки: BABOS
Номер модели: SC-5
МОК: 50 шт.
Цена: Подлежит обсуждению
Условия оплаты: Л/К, Д/А, Д/П, Т/Т, западное соединение
Возможность поставки: 10,0000pcs в месяц
Подробная информация
Место происхождения:
Китай
Материал:
Карбид вольфрама
Форма:
Цилиндр обнюханный шариком
Диаметр резки:
1/2 дюйма (12,7 мм)
Длина обрезки:
1 дюйм (25,4 мм)
Диаметр хвостовика:
1/4 дюйма (6,35 мм или 6 мм)
Общая длина:
2-3/4 дюймов
Тип флейты:
Стандартная двойная резьба
Подходит для:
Профиль обрабатывающей поверхности заготовки
Приложение:
Стирание, формирование и отделка
Количество упаковки:
1 шт.
Макс. об/мин:
50 000
Упаковывая детали:
Пластиковая коробка
Выделить:

Двойная резка цилиндрическая резка

,

Металлические цилиндрические резачи

,

Ударник для шлифовальной машины

Характер продукции

SC-5 1/2" X1" X1 Цилиндрический твердосплавный бор с радиусным концом-1/4" хвостовик, двойной рез, стандартные роторные боры ANSI


The SC-5 is a 1/2" (12.7mm) cylindrical carbide burr with a radiused end and a 1/4" (6.35mm) shank, in standard double cut. The side wall blends into the end through a radius instead of meeting it at a sharp corner, so the burr leaves a smooth fillet and can work into concave transitions that a square-end tool cannot follow. It is the standard choice for blending radii, finishing slots and cleaning up internal corners in dies, molds and machined parts.

SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs


Why the SC-5 is specified for radius work

  • Radius end (ANSI Type C) — produces a fillet rather than a sharp internal corner, reducing stress concentration in the finished part
  • 1/2" head with 1" flute — enough reach for slot walls and cavity sides while staying rigid at the shank
  • Double cut flutes — smaller chips, smoother finish and easier control on stainless and hardened steel
  • Virgin fine-grain carbide — resists chipping when the radius edge meets interrupted cuts
  • Brazed and stress-relieved joint — keeps the head true under side load


Typical applications

  • Blending fillets at the base of a pocket or boss
  • Finishing slot walls and internal corners in die and mold repair
  • Radiusing edges of machined parts before assembly
  • Removing EDM recast and polishing cavity transitions
  • Deburring and blending on stainless steel, cast iron and hardened tool steel

Specifications

Field

Value

Model

SC-5

Shape

Cylinder with radius end (ANSI Type C)

Cut diameter

1/2" (12.7mm)

Cut length

1" (25.4mm)

Shank diameter

1/4" (6.35mm)

Overall length

2-3/4" (69.9mm)

Cut type

Standard double cut

Material

Virgin tungsten carbide, brazed head, hardened steel shank

Recommended speed

18,000–28,000 RPM


Recommended operating speed

Head diameter

Recommended speed

1/8"–1/4" (3–6mm)

35,000–50,000 RPM

5/16"–1/2" (8–12mm)

22,000–35,000 RPM

5/8"–3/4" (16–19mm)

16,000–24,000 RPM

7/8"–1" (22–25mm)

12,000–18,000 RPM


A 1/2" head on a 1/4" shank is a high-load combination. Run it at the lower half of the range, keep the shank insertion as short as the job allows, and stop immediately if vibration appears.



OEM, packaging and MOQ

  • Laser marking of your logo and part number on the shank
  • Custom plastic box, blister pack or branded carton
  • MOQ from 20 pcs per size; mixed-size assortments accepted
  • Samples for approval before mass production
  • Lead time: 7–15 days for stock sizes, 20–25 days for OEM packing


FAQ

Q: What is the difference between SC-5 and SB-5?

 A: Both are 1/2" cylinders. SB-5 has a flat end with cutting teeth for squaring pocket floors; SC-5 has a radiused end for blending fillets and finishing concave transitions.

Q: Can the radius end reach into a sharp internal corner?

A: No — a radiused tool leaves the radius it was ground with. If the drawing calls for a sharp corner, use a square-end (SB) burr and finish the corner by hand.

Q: Is 6mm or 6.35mm the actual shank size?

A: This model is supplied with a 1/4" (6.35mm) shank as standard. 6mm shanks are available on request — please state the requirement when ordering.


Ordering the SC-5? Tell us the quantity, shank preference and packing requirement — we reply with price and lead time within 12 hours.



Other Available Sizes Related to Type C Carbide Burrs Both in Metric and Inch Standard:


Metric Standard
Shank Dia. (mm) Cutter Dia. (mm) Length of Cut (mm) Overall Length (mm) Tool No. The Combination of Head and Shank
d2 d1 l2 l1
3 2 11 38 C0211 Solid
2.5 11 38 C2511 Solid
3 13 38 C0313 Solid
5 13 38 C0513 Brazed
6 13 45 C0613 Brazed
6 6 16 63 C0616 Brazed
6 25 65 C0625 Solid
8 20 65 C0820 Brazed
10 20 70 C1020 Brazed
11 25 70 C1125 Brazed
12 25 70 C1225 Brazed
16 25 70 C1625 Brazed
19 25 70 C1925 Brazed
25 25 70 C2525 Brazed
8 12 25 70 C1225 Brazed
16 25 70 C1625 Brazed
19 25 70 C1925 Brazed
25 25 70 C2525 Brazed
Inch Standard
1/8'' 1/8" 1/2" 1-1/2" SC-42 Solid
1/4" 1/2" 2" SC-51 Brazed
1/4'' 3/16" 9/32" 2'' SC-14 Solid
1/4" 5/8" 2'' SC-1 Solid
1/4" 1" 2'' SC-1L Solid
5/16" 3/4'' 2-1/2" SC-2 Brazed
3/8" 3/4'' 2-1/2" SC-3 Brazed
7/16" 1" 2-3/4" SC-4 Brazed
5/8" 1" 2-3/4" SC-6 Brazed
3/4" 1" 2-3/4" SC-7 Brazed
7/8" 1" 2-3/4" SC-8 Brazed
3/8'' 1" 1" 2-3/4" SC-9 Brazed





Customization:

  1. Please send us the drawings or other important information if you need non-standard carbide burrs.
  2. Please contact us if you need more information about type C burrs or other shapes of burrs.
  3. OEM is avaliable.As a professional manufacturer of solid carbide rotary burrs, we offer products in different standard sizes (imperial/metric) based on customer requirements. We can also provide customized flute design and production according to various workpiece materials.




Cut Selection Guide:


STANDARD CUT(M)

STANDARD DOUBLE

CUT (X)

WIDE CUT (C)

FINE CUT

(F)

ALUMINUM

CUT(W)

DIAMOND CUT(D)
SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs SC-5 1/2 "X 1" Цилиндр радиус Конец карбида Burr 1/4 "Шанк двойной резки ANSI стандартный вращающийся Burrs